ITE 6

 0    32 kartičky    sungorio
stáhnout mp3 Vytisknout hrát zkontrolovat se
 
otázka język polski odpověď język polski
Users in a recently installed wireless network are complaining of slow data transfer and frequent loss of connectivity. The technician checks that the wireless security is correctly implemented
začněte se učit
There is interference from outside sources, The wireless signal is too weak
A wired network is undergoing several changes that could leave it vulnerable to connection by unauthorized devices while the work is in progress. Which two temporary measures would enable
začněte se učit
Disable DHCP, Assign static IP addresses to the authorized devices.
What two default wireless router settings can affect network security?
začněte se učit
The SSID is broadcast, A well-known administrator password is set.
A network technician is checking a computer to see if the DHCP client is working correctly. The technician issues the ipconfig /all command. Which two parameters should the technician review? (Choose two.)
začněte se učit
default gateway, subnet mask
A technician is troubleshooting a problem where the user claims access to the Internet is not working, but there was access to the Internet the day before.
začněte se učit
The computer cannot communicate with a DHCP server.
A user can print to a printer that is on the same network, but the traffic of the user cannot reach the Internet. What is a possible cause of the problem?
začněte se učit
The PC default gateway address is missing or incorrect.
Port triggering has been configured on a wireless router. Port 25 has been defined as the trigger port and port 113 as an open port. What effect does this have on network traffic?
začněte se učit
All traffic that is sent out port 25 will open port 113 to allow inbound traffic into the internal network through port 113.
A PC is not able to connect to a wired network. Pinging the loopback address is successful, but the gateway cannot be reached. On the network switch all the interface lights are on, except for the interface connected to the PC.
začněte se učit
The network cable is faulty.
The current IP configuration of a small company is done manually and is time-consuming. Because of increased network growth, a technician needs a simpler way for IP configuration of workstations.
začněte se učit
DHCP
A technician troubleshooting a network problem has used CLI commands to determine that a computer has not been allocated a correct IP address from the DHCP server. Which command can the technician use to solve this problem?
začněte se učit
ipconfig/renew
Which network protocol is used to automatically assign an IP address to a computer on a network?
začněte se učit
DHCP
What security technique could provide secure access to a server located in a small office without the expense of implementing a DMZ or purchasing a hardware firewall?
začněte se učit
implement port forwarding
A group of users is unable to connect to the network. When testing several of the PCs and issuing the command ipconfig, the technician notices that all of them have an IP address in the 169.254.x. x range. What is the most likely cause of this problem?
začněte se učit
The DHCP server is not operational.
What is the correct compressed format of the IPv6 address 2001:0db8: eeff: 000a: 0000:0000:0000:0001?
začněte se učit
2001: db8: eeff: a:1
What is the proper CIDR prefix notation for a subnet mask of 255.0.0.0?
začněte se učit
/8
Which network server is malfunctioning if a user can ping the IP address of a web server but cannot ping the web server host name?
začněte se učit
The DNS server
Multiple users report that the workstations are assigned a 169.254.x. x IP address. The users are able to communicate only between each other. What is a possible solution?
začněte se učit
Restart the DHCP server.
An administrator deploys wireless access points across the office to provide wireless network connectivity to users. Each workstation receives an IP address via DHCP.
začněte se učit
Change the static IP configured on the file server
A workstation has been moved from the first floor to the fifth floor within an organization. The user is now reporting that the workstation cannot connect to the network.
začněte se učit
The workstation has been configured with a static IP address.
A device has been assigned the IPv6 address of 2001:0db8: cafe: 4500:1000:00d8:0058:00ab/64. Which is the host identifier of the device?
začněte se učit
1000:00d8:0058:00ab
Which IPv6 address represents the most compressed form of the IPv6 address 2001:0db8: cafe: 0000:0835:0000:0000:0aa0/80?
začněte se učit
2001: db8: cafe: 0:835: aa0/80
After having talked to the customer, a network technician suspects that an invalid IP address is the most likely cause of a network issue. Which step of the troubleshooting process does this represent?
začněte se učit
Establish a theory of probable cause.
Which filtering method uses the physical address to specify exactly which device is allowed or blocked from sending data on a network?
začněte se učit
MAC address filtering
How many bits are used to represent an IPv6 address?
začněte se učit
128
How many bits are used to represent the host address of a computer with the IP address of 192.168.1.25 and a subnet mask of 255.255.255.0?
začněte se učit
8
How many bits are used to represent the host address of a computer with the IP address of 192.168.1.25 and a subnet mask of 255.255.255.0?
začněte se učit
8
How many bits are used to represent the host address of a computer with the IP address of 192.168.1.25 and a subnet mask of 255.255.255.0?
začněte se učit
8
How many bits are used to represent the network address of a host with an IP address of 192.168.150.16 and a subnet mask of 255.255.0.0?
začněte se učit
16
How many bits are used to represent the network address of a host with an IP address of 192.168.150.16 and a subnet mask of 255.255.0.0?
začněte se učit
16
How many bits are used to represent the OUI part of the MAC address of a NIC card?
začněte se učit
24
How many bits are used to represent a MAC address?
začněte se učit
48
A group of users is unable to connect to the network. When testing several of the PCs and issuing the command ipconfig, the technician notices that all of them have an IP address in the 169.254.x. x range. What is the most likely cause of this problem?
začněte se učit
The DHCP server is not operational.

Chcete-li přidat komentář, musíte se přihlásit.